Author Archives: Paisley

Tips on How to Hire a Professional Paint Contractor

1. Get three Bids Minimum: Get bids from 3 distinct painting contractors for the job of yours. Friends and family are actually good reference sources. The way, you are going to know exactly how much period each contractor took to evaluate the state of the home of yours. The more you speak what you need painted, the more precise the quote you will get. Also a seasoned painter is going to need much more than a fast walk around the house of yours. Moreover , ask each and every contractor about the dimensions of the crew of his as well as the painters experience level.

 

The amount of coats a painter applies is not the sole factor in figuring out the quality and cost of the project. Time is actually cash in the painting tips community!

 

3. Check References: It’s essential to check past work and references. Get a summary of references from every contractor and phone them to discover about the experience of theirs with the professional. A historical past of good recommendations is a great indication. If at all possible, it’s also a great idea to operate by and look at several of the previous work the contractor has finished. Ask for a summary of neighbors that he might have painted for.

Professional Paint Contractor

Another point to question is do they’ve great credentials in the community of yours. Ask if they’re a part of the nearby BBB (Better Business Bureau)? Do they’ve any unresolved issues? You are able to also test them out on various other consumer affair websites, such as the nearby chamber of commerce.

 

In case they do not have appropriate insurance and also have an accident you can end up responsible. Not a threat you would like to take!

 

5. The Estimate/Quote: You need to then get an accurate and complete estimate/contract in writing. The agreement should have all of the contractor’s information that is key: title, address, telephone number, etc. It must then include whatever surfaces are actually going to get painted and precisely how the planning and paint will be put on. Be sure the agreement clearly says what’s and isn’t included in the task. It must specify what substance is actually gonna be used, the amount of coats utilized, the preparation which will be completed, a payment schedule along with a written guarantee.

 

Last but not least, as soon as you’ve done all of the research of yours on the contractor of yours and are actually certain you’ve a precise quote and the proper contractor for the project, sign up and fixed a routine to start work. When selecting a contractor ensure things are usually clearly spelled out before the job is actually slated to start and the projects of yours must always go smoothly. The contractor is going to make a big difference in the planet. An effective color contractor is able to design your house look fantastic and last a quite a while!

If I have an internal UPS, why add an Inline UPS?

Your Inline UPS corrects the power issues we discussed earlier and it also provides time for the system operator to save and close studies that may be in progress. This additional time will help prevent the corruption of patient data and the possible loss of access to your patient archive. These are high level functions not protected by the internal UPS.

normalflow.gif

Choosing a UPS. You will need to know how much power your system requires. This will be specified in VA or wattage, both are numbers representing the output ratings of the UPS. A good rule of thumb for selecting a UPS is 80% of the UPS capacity. This will allow for loss due to conversion and allow for start-up current, unfortunately nothing is free. “The VA rating is the apparent power, while the Watt rating is the real power (or true power). The difference between these two numbers is the reactive power. Reactive power arises due to the effects of capacitance and inductance of components in the load to be powered by the AC circuit. In a purely resistive load the apparent power is equal to the true power and the amount of VA’s and Watts used would be equivalent. However, in more complex loads, such as computers the apparent power used (VA’s) will be larger than the true power used (watts). The ratio of this difference is called the power factor.” Wikipedia Be sure to ask what input power will be required. Your system may be happy with a 15amp outlet but the UPS may need a 20amp supply. That additional 20% capacity may push you input current up to the next breaker size. What about maintenance? Most UPS units require little maintenance. They should be clean and free from debris. This type of UPS is heavy and tends to disappear under a table or in a corner. They must have adequate airflow.

These units usually have resident self-testing which will warn the operators if there are circuit faults, internal failures and battery issues. Their batteries are typically sealed gel cells and are functional for 5 or more years. They should be replaced and disposed of in accordance with manufacturers’ recommendations, local and federal laws.

Are there different kinds of UPS’s?

The most common types of UPS’s we encounter are: The Offline or Standby UPS passes power through to the load until a power failure, sag or spike occurs. At that point the UPS switches the load from the primary or utility power to its battery powered inverter. Though the transition results in only a small delay in the restoration of power it has the potential of causing catastrophic system failures. Once the utility power has returned to normal for a predefined period of time the UPS will switch the load back, an additional transition that can create system issues. This design only charges when the power utility is available. It typically has a modified square wave output and is designed for 600VA or less. Though cost effective it will not address most of the power problems listed previously.

The Inline UPS is the best candidate for use with your Ultrasound system. The inline UPS, also called a dual-conversion or double-conversion UPS, isolates the load from the power utility. The Inline uninterruptible power supplies operate by converting incoming utility AC power to DC and then convert the DC back to AC to power the connected equipment. This design isolates the load from the incoming power and generates the sinusoidal output. These UPS’s address all our power concerns and allow for the use of almost any incoming power. Most Inline UPS units have a monitoring system on the output that senses when the voltage or current goes out of specification; a bypass is then activated to shunt incoming AC directly to the attached load without interruption.

apc_table1.gif

What if my system has an internal UPS? The internal UPS provides power to allow the systems CPU’s time to perform an orderly shutdown. These devices are not nearly large enough to supply the needs of your entire system they provide your system the time needed to save pointer, close files and park disk drives.

Should My Ultrasound Machine Have a Ups?

Diagnostic Imaging Ultrasound systems continue to become more technologically sophisticated, taking advantage of embedded operating systems, faster processors and increased RAM capacities. These advances allow for faster and wider image data processing, 3D/4D imaging, better noise canceling algorithms and enhanced diagnostic tools. Most of these new Ultrasound platforms are dependent on information stored on hard drives, magneto optical drives, CD/DVD drives and network drives.

25748_ups.jpg

One of the by-products of this rapid increase in complexity has been a drastic increase in data corruption, system lock-ups and general operational abnormalities. Power failures, sags, surges, and line noise wreck havoc. These problems are worst during transitional weather periods. The onset of Summer is heralded by an avalanche of Air Conditioning system coming on line. The beginning of Winter is marked by millions of heaters cycling on. Manufacturers now recommend the use of a UPS with most new Ultrasound systems to provide better uptime and to protect the customer’s investment. Where do you start? The first question would be what is a UPS? Federal Standard FED-STD-1037C, published August 7, 1996 defines a UPS as: “Uninterruptible power supply (UPS): A device that is inserted between a primary power source, such as a commercial utility, and the primary power input of equipment to be protected, e.g., a computer system, for the purpose of eliminating the effects of transient anomalies or temporary outages. Note 1: A UPS consists of an inverter, usually electronic, that is powered by a battery that is kept trickle-charged by rectified ac from the incoming power line fed by the utility. In the event of an interruption, the battery takes over without the loss of even a fraction of a cycle in the ac output of the UPS. The battery also provides protection against transients. The duration of the longest outage for which protection is ensured depends on the battery capacity, and to a certain degree, on the rate at which the battery is drained.”

What common problems does a UPS address? A UPS may be used to correct the following problems: 1. Power Failure – Total loss of line or power utility (PG&E) 2. Power Sag – Short duration under-voltage condition 3. Cycle Loss – Loss individual AC cycles 4. Power Spike (Surge) – Short duration over-voltage condition 5. Brownout – Extended duration low line voltage 6. Over-voltage – Extended duration high line voltage 7. Line noise – Noise superimposed on the power waveform 8. Frequency – Variations in power waveform frequency 9. Switching transient – Under or Over-voltage for a few nanoseconds 10. Harmonic Distortion – Multiples of the power frequency superimposed on the power waveform

The Greening of Personal Care: Eco-estheticians Lead the Way

Natural skin care is nothing new. Many a peaches-and-crème complexion owes its glow to pure soap and water–with a touch of moisturizer for extra radiance. Homegrown remedies using witch hazel, aloe vera, or shea butter have long treated a variety of conditions, from oily to sensitive skin. And even the ancient Egyptians developed many holistic treatments derived from earthen ingredients.

And now, thanks to the greening of personal care, natural skin care has come full circle–and is here to stay. With natural and organic skincare products leading the way as the country’s fastest growing cosmetics and toiletry market, it’s “only natural” that estheticians are also plugging into this booming interest in eco-cosmetics. The trend toward health-and-wellness has brought the spa lifestyle to all and not just a select few. This all equates to a greater demand for highly skilled, licensed beauty professionals who are trained in natural or alternative treatments, such as aromatherapy, body wraps, salt glows, reflexology, and more. Interest in sustainable beauty and fashion has also led to the growth of new eco-spa resorts—environmentally sensitive retreats where pampering comes with a clean conscience. Guests can rejuvenate and purify mind, body, and soul in a soothing sanctuary that celebrates nature and offer healing indulgences, like sea salt scrubs or hot stone therapy. And other spas are doing their part to go green, from incorporating conservation principles such as the use of low-flow showerheads, bamboo flooring, or energy efficient lighting, to offering organic cotton linens, towels, and robes. This new stewardship toward humane and responsible practices means that more and more spas are looking for perceptive, responsive estheticians who can encourage their customers and build relationships. AJF Salon, located at 3016 J Street, Sacramento, CA and managed by Adam Federico, a third generation Federico, carries eco-friendly Davines hair care products. Davines is a leading manufacturer of high quality products created to respect the environment by using high grade natural ingredients. Ahead of its time, Bioelements has been using recyclable glass jars and earth-friendly ink and paper since the company was founded in 1991. Especially popular with AJF’s clientele are Bioelements’ paraben-free product line, which includes Urban Detox, Equalizer, Stress Solution and VitaMineral Power Pen. To Gary Federico, President of the Federico Beauty Institute, and Adam’s father, eco-friendly issues have been a top priority. Earlier this year, Gary Federico was awarded a clean air business award by Breathe California of Sacramento-Emigrant Trails for his environmentally sound practices. “It’s not just about hair or skin care, but also about giving back,” says Gary Federico, who has installed a photovoltaic carport system, changed lighting to energy-saving Compact Fluorescent Lights (CFL’s) and installed occupancy sensors which automatically shut down unused Air Conditioning and lights. In the use of solar power alone, the school is annually reducing CO2 emissions by 165,643 pounds, or the equivalent of 14 passenger cars from the roadways.

41c1h5ansyl._sx306_bo1204203200_.jpg

ABOUT FEDERICO BEAUTY INSTITUTE Federico Beauty Institute is a third-generation, family-owned and operated beauty school www.federico.edu/about-us that continues its 60-year commitment to educating cosmetology and esthetics students. Their mission is to hold the highest standards to produce future leaders of the beauty industry.

What a Home Warranty Will not Cover?

Many people think that home warranties are exclusive to new homes. This is not accurate, although for many years home warranties were primarily marketed for newly constructed houses. Today, many people are becoming more aware of home warranties for older homes.

Home warranties can either be purchased for the home by the buyer or the seller of the property. A seller usually purchases a home warranty to solidify a sale, increase the saleability and increase the sale price of the home. Buyers usually purchase a home warranty when they buy an older home to cover the cost of any unexpected, major repairs. Regardless of why you are purchasing a home warranty, it is important to look at the coverage that is offered by the company. Coverage varies from company to company and state to state. When you talk to a home warranty agent, be sure to ask what is and is not covered on your home warranty specifically. Most home warranties will cover: • Air Conditioning system • Built in dishwasher • Built in microwave • Built in trash compactor • Ceiling fans • Central heating unit • Duct work • Electrical systems • Garbage disposal unit • Plumbing systems • Refrigerator • The oven or range • Washer and dryer • Water heater

Most of everything else is not covered. This includes: • Outdoor sprinkler systems • Outdoor water systems • Faucet repairs (unless otherwise stated in the policy) • Spas (you can request/add this coverage in some cases) • Pools (you can request/add this coverage in some cases) • Hot tubs (you can request/add this coverage in some cases) • Permit fees • Hauling away debris • Hauling away old appliances

It is important to remember that some, or all, of these following are not covered on a few select plans, so if you are looking for this coverage, be sure to ask for these items to be included:

• Washers (because they are not built in to the home and are not always included with a home.) • Dryers (because they are not built in to the home and are not always included with a home.) • Garbage disposals • Garage door openers • Refrigerators There are also several things that could cause your home warranty to be invalid for a claim, which is another thing you need to check on before you sign on the dotted line and pay for your home warranty. Improper maintenance of the items covered by your home warranty tops the list for reasons your claim may be denied from the warranty company. Code violations and improper installation are also included in reasons why your request for a claim could be denied. It’s important that you check that your appliances are installed correctly and that your home meets the building codes. Before you purchase a home with a home warranty, have an inspection done and be sure to find out if the electrical and plumbing systems are up to code. Unusual wear and tear on an appliance is also a cause for non-allowance of a claim with a home warranty company. It is best that you ask your home warranty agent what will deny coverage for a claim and have that put in writing with your home warranty policy.

asset-upload-file779-111739.jpg

When you are talking to the agent for a home warranty, ask for your policy in writing, as well as anything else that you spoke about. For example, if your home warranty agent tells you that the garbage disposal is included in the warranty, be sure that is in writing in the policy. It is important, too, to remember that home warranty policies change from company to company. The rates, what is and is not covered and all the terms and conditions of a home warranty can differ greatly between two companies. Never assume that two home warranty policies from two companies are the same, or even similar, until you have compared the policies (in writing).

Why You Need Awning and Industrial Fabrics?

Awning fabrics and industrial fabrics are materials used in the construction industry. These materials have been especially helpful in residential and industrial buildings all over the world. In the later part of the eighteenth century and earlier nineteenth century, there were major changes affecting transportation, agriculture and manufacturing, this is the Industrial Revolution period. Slowly, the changes spread from Europe, North America and then the whole world. Industrialization is continuously evolving, and is considered the turning point of the human society. Almost every phase of the daily life is influenced by the Industrial Revolution, thus giving rise to awning fabrics and industrial fabrics.

1454088270_new-099-medium.jpg

Awed by Awning Fabrics Attached to the outside wall of a building is a secondary covering called awning fabrics. Awnings can be traced back to the ancient Syrian and Egyptian civilizations when they were just seen as woven mats found in homes and as shade of market stalls. Awning fabrics are composed of laminated vinyl, cotton or polyester yarn, canvas that is acrylic woven. They are tightly stretched over wood, aluminum, steel or iron to act as a truss or a space frame. Awning fabrics are commonly found on doors, above a window or the upper area just along the sidewalk. By adding columns to awnings, they are transformed into canopy, and is now extended further from the building itself like what is usually seen in hotel entrance.

Types of Awnings Awning fabrics come in two types, the manually operated type and the electrically operated type. Naturally, those operated by hand are less costly and more adaptable but both gives similar benefits. The support arms can be set vertically or angled back. The arms make awnings stable and provide additional support, especially during windy days. There are awning fabrics and industrial fabrics available today that offer accessories making its uses more versatile especially in the patios and decks. An add-on of screen room is one typical accessory that will surely transform an awning into a bug-free room. Another accessory is the side screen, which helps in cutting down the mist and wind coming from under the sidings of awnings.

The Benefits Aside from its classic simplicity, awnings give ultimate convenience to the owners, especially during certain weather conditions. When it gets hot or threatening rain shower, awning fabrics can just be unrolled and you will get an instant protection and shade. Studies showed that awning fabrics and industrial fabrics can generate up to twenty degrees cooling capacity. And since they prevent the sun rays through windows and glass doors, awning fabrics also keeps hotels and restaurants cooler and owners are able to save up to 65% on Air Conditioning expenses. Sunrays also make furniture and carpets to fade fast, but with an awning canopy, it will surely help its protection. Awning fabrics also helps protect and shield children at play by acting as shelter from the harmful rays of the sun.

Removing Black Hair Dye

Hair dye’s are used by people every where to give their hair a 3D’cle look making them look good, but when it comes to removing hair dye especially “Black” hair dye it’s a whole new aspect as it needs more attention and more precautions to attend to the health of the hair after the process. Removing black hair dye is a special case; continue reading and we tell you various methods of removing it from our hair and other undesirable places.

Removing black hair dye is a tricky process, and if it’s permanent the process gets trickier. The best way or method is to let nature of our body do it’s work, what do you mean you say, let your natural black hair outgrow the black dyed hair. If you in a hurry or your annual dinner is just round the corner and your need a quick hair do, bleaching with chemicals is the only way to go. Bleaching is a straining process, not for you of course with you sitting on the salon reading magazines with Air Conditioning; but to your hair. Bleaching makes your hair stretchy and thin, as bleaching bleaches away the black dye and the outer layer of your hair making it fragile. If it’s done in a non-professional matter your hair may come loose on your comb, don’t get frighten like you got cancer. The main caution when removing black hair dye is that so it is to be removed evenly. After the bleaching process a toner is recommended to be used as this would reduce the orangey tone of the hair. It also acts as a conditioner for the hair preventing further damage. Other options are also available to be used for removing black hair dye, which is to use other colored dyes to remove it after some mild bleaching and shampooing. A mixture of powder bleach and shampoo/conditioner is used, whilst preparing the mixture with equal parts of water. A creamy consistency or mixture is to be obtained after a mild mixing of the ingredients is done. The mixture after been applied evenly and quickly slows down the bleaching process that actually strains the hair. This process is to be done at salons with people who are professionals in such fields, but for people that are equip with enough knowledge and practice it can be done at home. The time frame which the mixture is left on the hair is also a vital factor, if a short duration is at hand it would make the process easier but the whole process would take a much longer period of time as several trips are needed to complete the whole circle of process.

1be8182adc9eca284ce171d50f09a63f.jpg

Black hair dye has to be dealt with respect, as it is difficult to be removed from any surface including skin and fabric. Applying Vaseline along the hairline is a good idea for prevention. Several other ways of removing black hair dye like rubbing cigarette ash, dipping milk in cotton balls, using WD-40, nail polish and hair spray over the stained area can also be applied.

Reminiscing the Volkswagen Iroc Concept

It is almost six straight months that the automotive industry have not heard updates about Volkswagen’s IROC concept that was unveiled at the Mondial de l’Automobile 2006 or simply known as the 2006 Paris Motor Show that was held last September 2006. Car fans are drooling to see the production model of the IROC concept anytime soon. For those of your who have forgotten the details of the Volkswagen IROC concept in and out, Let us go back and see what the IROC concept has to offer for the millions of car enthusiasts around the world.

003_033.jpg

The VW IROC concept is describe as “a perspective on the sports car of tomorrow” and “transfers the globally successful Scirocco idea into the future, according to the German automaker. Volkswagen aims to bring back the success made by the popular Scirocco hatchback with quality Volkswagen Scirocco parts way back in the 70s and 90s. Actually, the VW IROC concept is the 2008 model year of the Volkswagen Scirocco. According to Volkswagen, the new design expression of the Volkswagen concept shows that the IROC is a car thoroughly designed for dynamics. Outside, this sports coupe concept features a distinctively shaped radiator grille, the first grille design for Volkswagen. The German automaker also equipped other models with distinctive grille designs for their identity. The Volkswagen IROC is noted for its “viper green” paint finish along with other exterior car parts like xenon headlights, hexagonal air intake, additional right and left air intakes, and V-shaped A-pillars. These exterior parts highlight the VW IROC’s sporty sleek and aggressive body styling. Now on the technical dimensions, the Volkswagen IROC has a 2,680 mm long wheelbase that also emphasizes its spacious interior. Overall dimensions include 1,400 mm high, 4,240 mm long and 1,800 mm wide. Moreover, the light-alloy wheels is specially designed for the IROC concept measures 19 inch in size along with its and 235 performance tires.

Inside the VW IROC concept comes a “uniquely conceived design theme, an interior developed that was uncompromisingly harmonized for potential racing use”. The concept is equipped with sporty interior features and atmosphere. These features included the sporty front bucket seats with integrated 5-point seatbelts and central lock, redesigned round instruments, gauges and driver controls. The four seats are accompanied by spacious trunk resembling the functional characteristic of the Volkswagen Scirocco hatchback. The interior color, shapes, and trims include “viper green”, leather with reptile black embossing space fabric in titan black, black leather instrument panel, and hexagonal Air Conditioning vents in matt silver mirror.

Protecting Wires, Cables and Pipes From Animals Without Harming Them

So, why are animals attracted to wires, cables and other plastics? Studies of animal behavior have shown why animals are drawn to plastics products – the plasticizers and the aromatic odors of polymers, the bright colors and the texture of polymer products are all responsible for animals being attracted to plastic goods.

One solution is a combination of denatonium benzoate and capsaicin. Denatonium benzoate is a compound that is extremely bitter–so bitter in fact, that just a few grains put into a glass of water would make if absolutely undrinkable by a human or an animal. Add to this a synthetic compound that is like the hottest, spiciest pepper in the world, but one hundred thousand times hotter. Pure capsaicin is so hot that a single grain the size of a grain of salt would be far hotter than a bowl of jalapeno peppers. The Solution What the research has proven is that animals chew on plastic materials because they look good, smell good and taste good. A combination of denatonium benzoate and capsaicin alters the attractiveness in two of the three. These changes successfully solve the problem of animal damage, whether is grizzly bears in North America, woodpeckers in Norway, birds in Italy or insects everywhere. A combination of denatonium benzoate works on the following five principles, Aversion – By adding an extremely-bitter, foul-tasting property to the cable sheath or plastic component Discomfort – By adding an extraordinarily spicy property which causes severe distress to the mucosa of the animal Fear – By associating the smell of denatonium benzoate and capsaicin with the distressing experience Training – By teaching the animal that biting into products containing a product containing a combination of denatonium benzoate and capsaicin produces a very unpleasant experience, which leads to behavior modification and the animal avoids these products in the future Association and conditioning – Not only does the animal remember the bad experience, it has been found that the animal passes on the information to its progeny. The fear response and unpleasant reaction is also communicated to other animals in the vicinity Environmental Concerns We are guided by the principle of doing no harm to people, plants, or animals and no damage to the environment. Our approach is not to poison the animal or add hazardous chemicals. Using a combination of denatonium benzoate and capsaicin meets these goals. Furthermore, our approach has been to use environmentally safe products that do not enter into ground water resources and breakdown quickly in the environment.

protecting_wires_cables_and_pipes.jpg

The Conclusions It is possible to actually train animals and modify their behavior to polymeric objects containing animal repellents Animals need not be harmed or damage to the environment could be completely avoided by using Non toxic animal repellents in objects made of plastic Damage from animals can be completely controlled without harming the animals.